View Project "Aircraft Wireless"
Created: January 01, 2015 by fmason
Updated: January 01, 2015 by fmason
Project Master
| Name | Aircraft Wireless |
|---|---|
| Description | 2-seat racing monoplanes are a popular new sport, and the wireless set allows air crews to receive messages from their ground crew while in-flight. The wireless will be smaller and weigh significantly less than comparable sets. The project is sponsored by the Universal Flying Machine Company. |
| Code | P2015-001 |
| Customer | 3 |
| Owner | fmason |
| Phase | 6 |
| Status | 1 |
| Type | 1 |
| Create Time | 2015-01-01 00:00:00 |
| Create User | 6 |
| Update Time | 2015-01-01 00:00:00 |
| Update User | 6 |
Additional Information
Parts
There are no parts associated with this project.
Comments
There are no comments associated with this project.
Files
There are no files associated with this project.
Issues
Displaying 9-10 of 13 results.
Name:
mfg gate 1
ID: 9
Project: 2
Description:
Status: Started
Type: Task
Begin Date: 2015-03-26 00:00:00
End Date: 2015-03-26 00:00:00
ID: 9
Project: 2
Description:
Status: Started
Type: Task
Begin Date: 2015-03-26 00:00:00
End Date: 2015-03-26 00:00:00
Name:
cost/quality improvements
ID: 10
Project: 2
Description: Circuit board orientation in enclosure was inverted to aid assembly and test (mounted PCA component-side-up in enclosure changed to copper-side-up, allowing direct access to circuit board components and off-board wiring while mounted in the enclosure). Location of holes in the enclosure base and lid were adjusted for the new circuit board orientation, and enclosure artwork modified accordingly. To document the changes, the PCA assembly diagram and work instruction were updated for the tuning capacitor being mounted on the opposite side of the PCB, and the enclosure-level assembly diagram and work instruction were updated for PCA mounting change (orientation and new shorter standoffs).
Status: Started
Type: Task
Begin Date: 2015-03-26 00:00:00
End Date: 2015-04-22 00:00:00
ID: 10
Project: 2
Description: Circuit board orientation in enclosure was inverted to aid assembly and test (mounted PCA component-side-up in enclosure changed to copper-side-up, allowing direct access to circuit board components and off-board wiring while mounted in the enclosure). Location of holes in the enclosure base and lid were adjusted for the new circuit board orientation, and enclosure artwork modified accordingly. To document the changes, the PCA assembly diagram and work instruction were updated for the tuning capacitor being mounted on the opposite side of the PCB, and the enclosure-level assembly diagram and work instruction were updated for PCA mounting change (orientation and new shorter standoffs).
Status: Started
Type: Task
Begin Date: 2015-03-26 00:00:00
End Date: 2015-04-22 00:00:00
Orders
There are no orders associated with this project.
Stock
There is no stock associated with this project.